Spring Replacement a professional and tough job
When you want to repair your broken garage door springs and you need Spring Replacement Long Beach, you can either chose to call a professional to do it or do it by yourself. The springs are long and heavy and they are the ones that raise and lower the door. Here are a few steps that you can follow to replace your garage door springs.
Ensure that you power off the electric opener. This includes disconnecting it from your door. This method works for newer version of doors. For older versions it may involve the removal of the fuse or switching off the circuit breaker. This is done to prevent electrocution during the process. You then need to check and see that the spring you are replacing is the same as the one you have.
Do not grab the spring that you are removing by spring part of it. This could be dangerous and could cause an accident. Also make sure that you do not touch the winding cones on the new spring. Mark the both ends of the torsion shafts. Marking will help you see to it that you a leveled garage door after replacing the springs and you will need Spring Replacement Long Beach.
Once it is unwound you can take it out of the center plate. With the 9/16” wrench you unscrew the 9/16 bolts that are on the center plate. You go up to the drums and loosen the up with the 7/16” wrench because they have to come off if the spring will come out. You shift over the torsion tube and this way you can take of the spring to insert a new one. So hire a good service to get the job done in quick time.